SSMA CONNECTOR PRODUCTS
Straight Crimp Plugs for SSMA |
Part Number | Applicable Cable |
Image: Straight Crimp Plugs for SSMA |
299-830-TGG RG174 | RG174, 188A, 316 |
Straight Solder Plugs – With Centre Contact for SSMA |
Part Number | Applicable Cable |
Image: Straight Solder Plugs – With Centre Contact for SSMA |
299-910-TGG RG402 | RG402, 0.141” |
299-910-TGG RG405 | RG405, 0.085” | |
Straight Solder Plug – Without Centre Contact for SSMA |
Part Number | Applicable Cable |
Image: Straight Solder Plug – Without Centre Contact for SSMA |
299-910-1-TGG RG405 | RG405, 0.085” |
Right Angle Crimp Plug for SSMA |
Part Number | Applicable Cable |
Image: Right Angle Crimp Plug for SSMA |
299-660-TGG RG174 | RG174, 188A, 316 |
Right Angle Solder Plug for SSMA |
Part Number | Applicable Cable |
Image: Right Angle Solder Plug for SSMA |
299-720-TGG RG405 | RG405, 0.085” |
Straight Bulkhead Solder Jack for SSMA |
Part Number | Applicable Cable |
Image: Straight Bulkhead Solder Jack for SSMA |
299-790-TGG RG405 | RG405, 0.085” |
2 Hole Flange Mount Jack Receptacle for SSMA |
Part Number | Comments |
Image: 2 Hole Flange Mount Jack Receptacle for SSMA |
299-110-TGG | Exposed pin & PTFE |
4 Hole Flange Mount Jack Receptacles for SSMA |
Part Number | Comments |
Image: Exposed pin & PTFE 4 Hole Flange Mount Jack Receptacle for SSMA Not available |
299-270-TGG | Exposed pin & PTFE |
Image: Solder bucket contact 4 Hole Flange Mount Jack Receptacle for SSMA |
299-300-TGG | Solder bucket contact |
4 Hole Flange mount Right Angle Jack Receptacle for SSMA |
Part Number | Comments |
Image: 4 Hole Flange mount Right Angle Jack Receptacle for SSMA |
299-272-TGG | Solder bucket contact |
Plug to Plug Straight Adaptor for SSMA |
Part Number | Comments |
Image: Plug to Plug Straight Adaptor for SSMA |
299-580-TGG | n/a |
Jack to Jack Straight Adaptor for SSMA |
Part Number | Comments |
Image: Jack to Jack Straight Adaptor for SSMA |
299-580-TGG | n/a |
Other connectors available on request.
If you can't find what you're looking for, please use our connector specifier section.