1.0/2.3 CONNECTOR PRODUCTS
Straight Crimp Plugs for 1.0/2.3 |
Part Number | Applicable Cable |
Image: Straight Crimp Plugs for 1.0/2.3 |
100-835-TNG RG58 | RG58, 58A, 141A |
100-835-TNG RG142 | RG142, 223, 400 | |
100-835-TNG RG174 | RG174, 188A, 316 | |
100-835-TNG RG179 | RG179, 187A | |
100-835-TNG BT3002 | BT3002 |
|
Right Angle Crimp Plugs for 1.0/2.3 |
Part Number | Applicable Cable |
Image: Right Angle Crimp Plugs for 1.0/2.3 |
100-665-TNG RG58 | RG58, 58A, 141A |
100-665-TNG RG142 | RG142, 223, 400 | |
100-665-TNG RG174 | RG174, 188A, 316 | |
100-665-TNG RG179 | RG179, 187A | |
100-665-TNG BT3002 | BT3002 |
|
Straight Bulkhead Crimp Plugs for 1.0/2.3 |
Part Number | Applicable Cable |
Image: Straight Bulkhead Crimp Plugs for 1.0/2.3 |
100-730-TNG RG58 | RG58, 58A, 141A |
100-730-TNG RG142 | RG142, 223, 400 | |
100-730-TNG RG174 | RG174, 188A, 316 | |
100-730-TNG RG179 | RG179, 187A | |
100-730-TNG BT3002 | BT3002 | |
Right Angle Bulkhead Crimp Jacks for 1.0/2.3 |
Part Number | Applicable Cable |
Image: Right Angle Bulkhead Crimp Jacks for 1.0/2.3 |
100-620-TNG RG58 | RG58, 58A, 141A |
100-620-TNG RG142 | RG142, 223, 400 | |
100-620-TNG RG174 | RG174, 188A, 316 | |
100-620-TNG RG179 | RG179, 187A | |
100-620-TNG BT3002 | BT3002 | |
Straight Bulkhead Solder Jacks for 1.0/2.3 |
Part Number | Applicable Cable |
Image: Straight Bulkhead Solder Jacks for 1.0/2.3 |
100-790-TGG RG402 | RG402, 0.141” |
100-790-TGG RG405 | RG405, 0.085” | |
Straight PCB Mount Jack Receptacle for 1.0/2.3 |
Part Number | Applicable Cable |
Image: Straight PCB Mount Jack Receptacle for 1.0/2.3 |
100-860-TGG | n/a |
Straight PCB Mount Bulkhead Jack Receptacle for 1.0/2.3 |
Part Number | Applicable Cable |
Image: Straight PCB Mount Bulkhead Jack Receptacle for 1.0/2.3 |
100-673-TGG | n/a |
Right Angle PCB Mount Jack Receptacle for 1.0/2.3 |
Part Number | Applicable Cable |
Image: Right Angle PCB Mount Jack Receptacle for 1.0/2.3 |
100-670-TGG | n/a |
Other connectors available on request.
If you can't find what you're looking for, please use our connector specifier section.